Finish your custom metal barn with something sturdy that will stand up against the elements. All roof styles can be certified for structural integrity, but finding the right roof type for your climate and need is important. We have many different metal barns for sale and many options to customize your metal barn. You want to find a strong roof type that fits with your home and other metal buildings and will stand up best to the elements. Talk to our customer service representatives to learn more about which roof type is best for you.
VERTICAL ROOF STYLE – BEST
If you live in a climate with heavy snowfall or heavy rain, AA Carport recommends the vertical roof style. The vertical roof panels allow snow and rainwater to exit off the sides. This is an A-frame designed roof with panels installed vertically, with the corrugated ridges running from the highest point on the roof down the side of the building. We also recommend that all buildings longer than 36’ use a vertical style roof.
BOXED EAVE STYLE – BETTER
This is also an A-frame design, but rather than vertical panels, these panels are installed horizontally. This is more affordable since it does not have the hat-channel pieces that need to be installed with a vertical roof. Good for areas that have some heavy winds but don’t get a lot of snow or heavy rains.
REGULAR – GOOD
This roof style is the most economical. Here in the regular style roof, the corrugated ridges run from end to end. This roof style is great if you live in an area without heavy winds and rains. Perfect to protect your cars from sunshine and damage from exposure to the sun. Call our customer service representatives and ask which roof would be right for your new metal barn.
CHOOSING THE RIGHT SIZE FOR YOUR NEEDS
WIDTH SIZING CHART
How will you use the barn? Do you have a specific piece of equipment that you will need to store? This is important to consider when you talk to our customer service representatives. We can help you find the right width for your needs.
When measuring width sizing for your new metal barn, take into account the barn will have 3 widths that need to be measured. The center width is the largest area and provides a nice open space to store equipment among other things. The widest center building we can provide is 30’. Any center width larger than 30′ would be considered a workshop but workshops are offered with our 12′ wide lean-to’s as well, see our Workshop buying guide for more detail.
The left and right sides of the barn, called the left and right lean-to, are generally 12’ on each side. Again, chat with our friendly customer service representatives to learn more about how we measure the width of our metal barns for sale.
Again, how will this be used? Will you store multiple vehicles in here? Tractors or other large farm equipment may need quite a bit more space than one or two horses. All of our metal barns for sale can be customized to the length that you need. The industry standard length for metal barns is 21’, 26’, 31’, and up in 5’ increments. Take a look at some of the metal barns for sale, we can customize any style or model to fit the length you need. Speak with our customer service representatives to learn more.
Note: The roof of every structure is always longer than the base due to a 6” overhang on each end of the roof.
Our standard metal building height starts at 6’ and goes up according to customer need. We have 3 side heights to account for. The left and right lean-to heights will be the same, and will sit below the side heights for the center building. The height of the lean-to is the distance from the ground to where the outside wall meets the roof, not the highest point of the lean-to. The same is true for the center building, height is determined by the height of the legs of the barn, not the height at the top of the building. Chat with our customer service representatives to learn more about measuring for the right size metal barn.
STEEL GAUGE FRAMING
What’s the difference between 14 gauge and 12 gauge framing?
Many first time garage buyers ask about the difference in the 14 and 12 – gauge steel framing. Our most economical option is the 14 gauge steel framing, This is the industry standard, measuring 2 ½” x 2 ½” in diameter.
While they both have the same measurements when assembled, the lower the gauge, the thicker and stronger the material. Our 12-gauge framing is 2 ¼” x 2 ¼” in diameter and has a higher tensile strength that provides higher snow load and wind load ratings. Which is why we recommend the 12-gauge steel for areas with heavy snow and high winds, as well as buildings 10’ and taller.
The 14-gauge steel is the industry standard of frame thickness and the most nationally accepted gauge for carports and metal structures.
Both gauge options are structurally sound and will allow you to use the carport or metal building safely. Both of our gauge options can be certified, but we can only offer our extended warranty when you select the 12-gauge steel option.
Certified v. non-certified buildings
A certified building has been designed by an engineer and has ratings for wind and snow load. Some local ordinances require that you certify any building that you construct. The objective of the building codes is to insure safety and to protect the public. Some states, don’t require buildings to be certified because they may not have to worry about heavy snowfalls and high winds. Certain states require that any new structure constructed be certified. Some require all structures to be inspected, while others only require that occupied structures be inspected prior to people living or working inside. We are able to prepare and install custom metal storage building and custom metal barns to meet the criteria for certification. When preparing your base for your metal pole barn or steel storage shed installation, please be sure that the ground is level and the concrete slab or asphalt slab poured is wide enough to support the barn and anchors. Please note there is no additional warranty on certified buildings. A certified building simply means the building is built to specifications and certified by a professional engineer to meet local building requirements.
If you do need to certify your building, you will likely need a copy of the blueprints for the inspector to review. Please speak with our customer service representatives to learn how to get a copy of the blue prints.
REGULAR ROOF STYLE (Horse Barn)
The Horse style offers a rounded corner roof with a minimum 9’ interior leg height. This design is our most economical design, and can be customized to meet your needs. You can customize the roof to suit your needs and fit your budget. Call to learn more about the Horse barn style.
A-FRAME ROOF STYLE
The Carolina style has an angled roof style, and helps to keep snow and rain from your livestock and equipment. We offer the Carolina metal barn style for those looking for 10’ barns and above. This offers the traditional barn appearance and can be customized to meet your needs. If you choose to add side panels to the barn, the panels will be installed horizontally. As an additional upgrade option the side panels can still be installed vertically while keeping the A-Frame Roof panels horizontal. Speak with one of our customer service representatives to help you customize each feature of your barn.
VERTICAL ROOF STYLE
Our strongest and most popular design, the Seneca barn style has a strong A-Frame vertical roof design, with 9’ minimum interior leg height. We suggest this model for those who have heavy winds and strong snows. If you choose to add side panels to the barn, the panels will be installed horizontally.As an additional upgrade option the side panels can be installed vertically to match the vertical roof panels . Speak with one of our customer service representatives to help you customize each feature of your barn.
Customize your metal barn with some of the options below. The possibilities are endless and the barn will last for a lifetime of memories.
Additional options can be added to customize Barn for a particular situation- customizations include:
WINDOWS – Let natural light in to your metal barn. AA Carport offers 30” x 30” as a standard window size, which can be installed on any portion of your enclosed custom metal barn or metal storage shed. Other window sizes are available, but vary by location, so call our customer service representatives to see what options are available close to home.
WALK-IN DOORS – We offer multiple options for walk-in doors. Walk-in doors are a great addition and can always be added later when you enclose a custom metal barn and transform it into an enclosed barn. Many customers prefer to have doorways into one portion of the barn to make it easier to get to vehicles and items stored in metal barn. We have doors available with windows or without. Please specify if you do not want the window when you place your order. We offer all walk-in doors in a white finish.
GARAGE DOORS – We offer a variety of garage door options. Some things to consider when installing garage doors on custom metal barns are: 1) will you have electricity, 2) will your structure be tall enough to install a garage door, and 3) can I add a garage door later if I don’t want to add one now? The answer to these questions will help us find the perfect garage door solution for you. Not only can we provide the garage door for the front or end of the barn, we can also install the garage door on the side of the barn for easy access to your stored vehicles or livestock. Contact our customer service representatives and ask about the garage door options available in your area. Take a look at our blog post if you want to learn even more about garage doors.
PANELS – If you like the look of the open side barn available with the A-frame style barn (carolina), but want to enclose the sides later, panels are perfect for you. Panels can be added to any of the barn sides to enclose and customize the barn to fit your needs.
GABLE ENDS – Gable ends increase the appearance by hiding the frame and braces on open lean-to sides. It provides additional strength and added framing support, and provides better protection for whatever you are storing. Gable ends provide you with a nice finished look on your metal barn and will help rein-force the structure against harsh winds and weather conditions. All of our steel barns for sale can be customized with gable ends. The gable is the triangle of material that helps to enclose the very top portion of the metal carport. The enclosed roof helps to better protect your car and gives the custom barn a nice finish. This additional option can be added after installation, however AA Carport recommends adding a gable to your steel barn order before installation to save on the additional installation trip and fees.
J-TRIM – Decorative trim applied to the edges of panels so they are not exposed for safety and it also gives the unit a nice finished look. If you plan to leave one side or a portion of your custom metal barn open rather than enclosed, make sure you have something to provide safety and protect your new metal building. Add the perfect finishing touch to the custom steel barn or steel storage area with J-trim. Not only does it create a nice finished look, but it also covers the edges of the panels for safety. We recommend this feature for homes with young children to increase the safety of the metal barn. All of our metal barns for sale can be customized with safety and style in mind.
EXTRA BOWS & TRUSSES – Extra bows and trusses can be added to your unit to make it stronger. Bows and Trusses are the structural supports that fit inside the roof of your structure to add strength and stability to your custom metal barn, additionally, they are available to reinforce the sides to better support and stabilize your building. If you live in an area of heavy snow or intense weather, you should consider adding bows or trusses to give additional strength to your metal building. All barns up to 24’ wide have a bow, and all units wider than 24’ have a truss. Take a look at our options to reinforce your structure.
ANCHORS – Very important option, and can vary depending on your installation type. Anchors are one of the most important options to consider when buying a metal barn. This is what keeps the structure grounded when faced with heavy winds. To discover what anchor works best for your needs, read our blog post here and talk with a customer service representative to find the right option for your budget.
We offer 15 colors to customize your Carport/ Metal Building.
Call our customize service representatives to see what colors are available in your area.You can customize the color of roof, sides, and trim of your structure.
INSTALLATION AND SITE PREP
INSTALLATION AND SITE PREP
Make sure that you have leveled the installation area. If you are installing a certified building, the site must be level to within 3” front to back and side to side. If the site is not level when the installation team comes out to install the structure they may have to reschedule the installation for a later date, which will mean an additional fee for the return trip.
Overview of delivery and installation process
Our customer service representatives will contact you to schedule a delivery date and time. Please be sure to clear all debris and level the area on which you would like your new metal barn installed. On delivery day, our installation team will arrive with all tools necessary to install the custom barn on the level prepared site. They will drill the anchors, and construct the building. If you need to have your building certified, please let us know before the date of installation so we can get everything ready and have the blueprints to you before the metal barn or horse barn is installed on your leveled lot.
In all states except Florida, the concrete pad should be the exact dimensions of the building frame. For example, for a 22″Wx26’L building, the base frame is 22’Wx25’L. In Florida, the concrete pad should be 3/4″ wider than the dimensions of the building frame and the exact length of the building frame. For example, for a 20’Wx31’L building, the base frame is 20’Wx30’L. The concrete pad should be 20′-3/4″x30’L. The concrete pad must be square – the dimension from corner to corner – across each diagonal must be exactly the same. Each individual City or county building and zoning have different requirements due to weather and conditions in your area. Is the customers responsibility to verify with their local building and zoning departments what type of footer is required for their structure.
Site Prep Checklist
1. Make sure the area is clear of debris
2. Make sure the site is level, this is especially important if the building will be certified, as the building cannot be more than 3” off level from front to back or side to side in any application. If the site isn’t level the installation team will attempt to level at an additional charge.
3. Make sure the installation team will be able to access the installation site, if there is more than a 50-foot difference between the installation site and the truck; you may be charged an additional service fee due to the additional time needed to complete your installation
Q: If I install a standard barn, can I customize the barn later?
A: You can always customize any structure you buy through AA Carport. If you want to get a partially enclosed barn now and enclose it later, we are available to help get you the perfect product for your budget. If we do send another team out to add additional pieces to your metal barn or shed, you will be charged a fee for the site visit in addition to the price of the new item. We encourage you to think about any additional changes you may want to make in the future and let our customer service representatives know your plans. We may have some suggestions to make the additions more cost effective. Contact our customer service representatives to learn more about how to customize our buildings after they are installed.
Q: What can I customize in my metal barn?
A: We offer many options to customize your metal barn. Not only can you pick the style, roof, and size, but you can customize with color as well. Make sure to talk to your customer service representative about the different color options that are available in your area. You can always add doors and windows to the custom metal barn for a nice finished touch.
Q: Can I include electric or water in my metal barn?
A: Many of our customers want to include running water or electricity in the metal buildings we install. We do not install the electric or plumbing when the installation team puts up the metal barn. If you plan to pour a concrete or asphalt slab for your barn, make sure that you plan ahead and get all pipes laid and accounted for. This includes any necessary plumbing to include a bathroom in your new metal building. Call your utility company to learn more while you are in the early stages of preparing for your new metal barn.
You should also consider the amount of light that is needed in the new metal barn, and talk with an electrician if you plan to have interior or exterior lighting on your metal barn.
Q: What is the widest barn offered?
A: The widest barn we offer is 54’ wide, with a center width of 30’ and 12’ on each side. This design and limit helps us to keep the structure strong and allow it to withstand high winds and heavy snow. We can customize the length and height to accommodate your needs. If you do want a barn that is 54’ wide, you will have to bring some equipment to the installation site to help the installers. AA Carport installation teams don’t travel with a lift, so we ask anyone with such a wide building to have a way to lift the roof into place. Contact our customer service representative to learn more about our barns and how we can help you find the perfect custom metal barn for the right price.
Q: What are my color options metal barn?
A: Color options vary by manufacturer. AA Carport partners with local manufacturers to get you the perfect garage or carport at the price you want. As we work with multiple manufacturers, the specific colors will change by region depending on what is available. Please call your customer service representative to learn what colors are available in your area.
Q: Should I insulate my barn?
A: If you add insulation to your metal barn or steel storage shed you will be better protected from the elements. Not only will you better protect your vehicles from the cold temperatures, but with insulation you will also prevent sweating or condensation from collecting inside the enclosed metal barn. We can install bubble installation in the units that we build to help insulate from the cold and heat. The insulation we provide has an R-value of 4.3, which is the standard measure of thermal resistance used in building and construction. This means that the insulation prevents condensation and the majority of heat from escaping the custom metal building. For more information check out our blog post on insulation and speak with one of our customer service representatives to add insulation to your metal barn today.